Put all files in var/bin with chmod755
and var/uninstall with chmod755
scrplg-Formatta_USB_Con_Hdd.sh ---------Format usb on your decoder with hard disk installed on your box
scrplg-Formatta_USB_Senza_Hdd.sh---------Format usb on your decoder without hard disk installed on your box
scrplg-Installa_E2.sh -----------Script to
install E2 after usb storage format will finish
Start your stb with dgs sifteam flash firmware without insert usb storage.When stb start put usb key and wait that firmware automount it
Now open SifTeam panel with green button---repeat green and select one of two scripts (format with hard disk - Format without hard disk).Wait until script process go to the end
Copy your e2 tar.gz firmware into /mnt/usb and start with sifteam script panel "scrplg-Installa_E2.sh" and wait that e2 unpack and sync your e2 release into usb
Now you are ready to boot your e2 firmware.
Reboot stb and select multiboot option to start e2 from usb storage
de multiboot functie kan je op deze manier maken, download
usb_config.img.en updaten in je ontvanger
Multiboot function supports as below style.
Code:
# 1 boot with CDKroot(NFS)# 2 boot from USB memory stick, with internal HDD# 3 original images as current flash memory# 4 boot with NFS# 5 boot from USB memory stick, but without internal HDD# 6 boot from internal SATA HDD# 7 boot from flash memory for another image
meestal gebruik je de optie 3 voor je image in flash te starten(je huidige image) of optie 5 voor de enigma 2 starten via de usb stick
je uboot versie moet minimaal 1.3.1 zijn is dit niet het geval kan je
hier de versie 1.3.3 downloaden
Topic: e2 in usb ipboxhd (gelezen 2354 keer)